Desorption and electrolysis unit
Brief introduction
Our desorption electrolysis unit is a new style high efficiency product integrated with new technique and technology that is used to process gold carrier carbon in gold production. This unit can perform outstanding desorption function for gold carrier carbon from gold mine carbon pulp plant and heap leaching plant so as to produce gold.
Features
1. High desorption rate,
2. High production capacity and low production cost
3. Cyanide free desorption
4. Barren carbon requires no dry heat re-generation
5. Carbon is conveyed by the automatic special non-destructive method. This conveyance process produces no powder carbon, carbon loss and gold loss.
6. High degree of automation reduces the labor intensity of workers; cyanide free environment presents good working environment.
Technical data
| Model | Capacity of per batch (Gold carrier carbon kilogram per batch) | Capacity of per day (Gold carrier carbon kilogram per batch) |
| 5000 | 5000 | 5000-7500 |
| 4000 | 4000 | 4000-6000 |
| 3000 | 3000 | 3000-4500 |
| 2000 | 2000 | 2000-3000 |
| 1500 | 1500 | 1500-2250 |
| 1000 | 1000 | 1000-1500 |
| 800 | 800 | 800-1200 |
| 500 | 500 | 500-750 |
| 300 | 300 | 300-450 |
SJ series double-impeller leaching tank
Brief introduction
SJ series double-impeller leaching tank is mainly used in cyanide leaching of gold producing and sewage treatment of cyanide factories. It is also used in metallurgy, chemical industry and light industry. In carbon slurry process and cyanide process, the leaching tank should be used together with carbon screen, carbon pulp and other auxiliary equipment.
Features
1.Reasonable structure and high transmission efficiency.
2.Large diameter impeller and low rotate speed lead to the low power and carbon consumption.
3.Air spread evenly; bubble size is small.
4.Impeller is lined with rubber; cycle speed is low; long service life.
5.Stirring intensity is proper, pulp density and fineness distribution are almost the same. Increase the
6.cyanide leaching efficiency and carbon adsorption rate.
Technical data
| Model | Diameter×Height (mm） | Effective volume (m3) | Rotating speed of impeller (r/min) | Diameter of impeller (mm) | Feeding pipe （mm) | Discharging pipe diameter (mm) | Planet cycloidal reducer | Weight (kg) | ||
| Model | Speed ratio | Power(kw) | ||||||||
| SJ2.5×2.5 | 2500×2500 | 6 | 65 | 800 | 2-Φ133 | 2-Φ133 | XLD2.2-4-29 | 29 | 2.2 | 2800 |
| SJ2.5×3.15 | 2500×3150 | 13 | 57 | 935 | 2-Φ125 | 2-Φ125 | XLD2.2-4-29 | 29 | 2.2 | 3120 |
| SJ3×3.15 | 3000×3150 | 18.93 | 51 | 1130 | 2-Φ150 | 2-Φ150 | XLD4-5-35 | 35 | 4 | 5300 |
| SJ3.15×3.55 | 3150×3550 | 24 | 43 | 1260 | 2-Φ150 | 2-Φ150 | XLD4-5-35 | 35 | 4 | 5488 |
| SJ3.5×3.5 | 3500×3500 | 29 | 46 | 1310 | 2-Φ150 | 2-Φ150 | XLD5.5-5-29 | 29 | 5.5 | 7820 |
| SJ3.55×4.0 | 3500×4000 | 35 | 36.3 | 1310 | 2-Φ150 | 2-Φ150 | XLD4-5-35 | 35 | 4 | 6646 |
| SJ4.0×4.5 | 4000×4500 | 50 | 33.5 | 1500 | 2-Φ150 | 2-Φ150 | XLD7.5-7-43 | 43 | 7.5 | 8285 |
| SJ4.5×5.0 | 4500×5000 | 71.67 | 33.5 | 17500 | 2-Φ159×6 | 2-Φ159×6 | XLD7.5-7-43 | 43 | 7.5 | 10800 |
| SJ5.0×5.6 | 5000×5600 | 98 | 31 | 1900 | 2-Φ159×8 | 2-Φ159×8 | XLD11-8-47 | 47 | 11 | 13340 |
| SJ5.5×6.0 | 5500×6000 | 112 | 31 | 2100 | 2-Φ159×8 | 2-Φ159×8 | XLD11-8-47 | 47 | 11 | 18745 |
| SJ7.5×8.0 | 7500×8000 | 268.6 | 21 | 2900 | 2-Φ159×8 | 2-Φ159×8 | XLD22-10-47 | 47 | 22 | 32796 |
| SJ8.0×8.5 | 8000×8500 | 342 | 16.4 | 3200 | 2-Φ159×8 | 2-Φ159×8 | XLD22-11-59 | 59 | 22 | 42467 |
6S Shaking Table
Brief introduction
6S Shaking table is one kind of main equipment of gravity concentration, which is be widely used in minerals separation of tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ores. It is applied in different separations of rough concentration, elaborate concentration and scavenging concentration, which can process coarse sand (2-0.5mm), fine sand (0.5-0.074mm) and ore slurry(-0.074). It also can be used in processing iron, manganese ore and coal. The effective recycling granularity range of shaking table is 2-0.22 millimeters during processing tungsten, tin ores.
Features
1.Characterized by high rich ore ratio, high separating efficiency.
2.Easiness to take charge and convenient adjustment.
3.Keep table surface operate balanced even though changing cross fall and stroke.
4.The springs with compact structure are placed in the table.
5.The final concentrated ore and gangue can be obtained once.
Technical data
| Model and Specification | 6-S/LY | 6-S/LY | 6-S/LY | LY | ||
| Table Size（mm） Length×Feed width×Concentrate width | 4520×1850×1560 | 3000×1620×1100 | 2100×1050×850 | 1100×500×430 | ||
| Selective are(㎡) | 7.67 | 4.08 | 2 | 0.51 | ||
| Feed size(mm) | coarse sand | 1-2.5 | 0.6-1.5 | 0.4-0.8 | 0.1-0.2 | |
| fine sand | 0.8-1.2 | 0.3-0.8 | 0.2-0.5 | 0.05-0.1 | ||
| slurry | 0.3-0.6 | 0.2-0.4 | 0.1-0.2 | 0.03-0.05 | ||
| Water consumption（t/h） | 0.5～3.5 | 0.3～1.5 | 0.2～1 | 0.1～0.5 | ||
| Stroke（mm） | 8～36 | 10～30 | 12～28 | 9～17 | ||
| Jig frequency（q/m） | 240～380 | 240～420 | 250～450 | 280～460 | ||
| Cross fall（°） | 0°～5° | 0°～8° | 0°～10° | 0°～10° | ||
| Motor | Model | Y70L-4 | Y100L-4 | Y90L-4 | Y80L-4 | |
| Power(kw) | 1.1 | 1.1 | 1.1 | 0.55 | ||
| Revolving speed（r/min） | 1400 | 1400 | 1400 | 1400 | ||
| V-belt（mm） | A-2000 | A-1033 | B-2007 | A-1245 | ||
| Overall Dimension(Length*Width*Height)mm | 5630×1850×900 | 4075×1320×780 | 3040×1050×1020 | 1530×500×800 | ||
| Weight(kg) | 650 | 550 | 350 | 150 | ||
| Notes: The above technical parameters based on stationary type shaking table, are for your reference only. | ||||||
JT Sawtooth wave jigger
Brief introduction
Sawtooth wave jigger is environmental friendly, highly efficient and energy saving new gravity separation equipment, which is widely applicable to various minerals separation of gold, tungsten, tin, iron, manganese, titanium, chromium, sulfur, coal and diamond and the smelting slag recovery of manganese slag, chromium slag and stainless steel slag as well as metal recycling of tailings.
Features
1. Large handling capacity;
2. Wide range of selective recovery granularity and high recovery rate;
3. Recovery rate of valuable mineral with medium-fine particle-size increased;
4. Low water consumption and low floor space;
5. Stroke is adjustable;
6. Max handling mineral particle size reaches 60mm.
Technical data
| Model | JT-0.57 | JT1-1 | JT2-2 | JT3-1 | JT4-2 | JT5-2/td> | ||
| Jigging Chamber | Section Form | Trapezium | Trapezium | Rectangle | Trapezium | Rectangle | Trapezium | |
| Length*Width(mm) | 450～750×950 | 450～900×1500 | 1070×1070 | 960～2000×1950 | 1510×1510 | 1200～2000×3150 | ||
| Column Number | Single | Single | Single | Single | Single | Single | ||
| Jig Chambers(psc) | 1 | 1 | 2 | 1 | 2 | 2 | ||
| Single chamber area (㎡) | 0.57 | 1 | 1.14 | 3.3 | 2.43 | 2.12(single chamber) 2.77(double chamber) | ||
| Total area(㎡) | 0.57 | 1 | 2.28 | 3.3 | 4.86 | 5 | ||
| Stroke Coefficient | 0.57 | 0.64 | 0.45 | 1 | 0.58(single power) 0.45(dual power) | 0.58(single power) 0.45(dual power) | ||
| Max feed size(mm) | 6 | 5 | 10 | <20 | 8, plus sieve automatic discharge <60 | 8, plus sieve automatic discharge <60 | ||
| Capacity(t/h) | 1～2.5 | 2～3 | 4～8 | 10～15 | 12～16 | 10～20 | ||
| Water Consumption(m³/h) | 1～2 | 2～3 | 2～4 | 3～6 | 4～8 | 5～10 | ||
| Separator | Stroke(mm) | 12，17，21 | 12，17，21 | 12，17，21 | 10～47 adjustable | 10～30 | 15，20，25 | |
| Jig frequency(min-1) | 60～156 adjustable | 60～156 adjustable | 60～156 adjustable | 80～100 adjustable | 80～120 adjustable | 80～120 adjustable | ||
| Motor | Model | YCT 132-4B | YCT 100L-6 | YCT32-4 | YCT-4B | YCT 160-4B | YCT 200-4A | |
| Power (kw) | 1.5 | 2.2 | 3 | 5.5 | 5.5 (dual power) 7.5 (single power) | 5.5 (dual power) 7.5 (single power) | ||
| Overall Dimension(Length*Width*Height)mm | 1530×780×1550 | 2060×1112×1890 | 2870×1520×1880 | 2662×2000×3030 | 4240×1990×2750 | 3940×2006×2580 | ||
| Weight(kg) | 612 | 989 | 1637 | 3260 | 3500 | 3854 | ||
| Notes: The above data is only for your reference, capacity and hutch water varying from ore granularity, ore property and operating condition. | ||||||||
LL Spiral chute
Brief introduction
Spiral chute is a type of new gravity separation equipment, which is applicable to separate metallic minerals granularity between 4 —0.02, such as iron , ilmenite, chromite, pyrite, tungsten ore, tin ore, tantalum-niobium ore, gravel mine, zirconite and rutile as well as other nonferrous metals, rare metals and nonmetallic minerals with adequate gravity difference.
Features
- Stable and clear mineral separation with large handling capacity
- High efficiency with higher concentration ratio and high recovery
- High adaptability of the feeding capacity and the variability of concentration, granularity and grade
- Easy for installation with small floor space and simple operation
- Material quality material quality with features of moisture resistance, rust protection and corrosion resistance
- With advantages of non-powered, without moving parts and without noise
Technical data
| Model | LL-2000 | LL-1500 | LL-1200 | LL-900 | LL-600 | |
| External Diameter(mm) | 2000 | 1500 | 1200 | 900 | 600 | |
| Pitch(mm) | 1200 | 720,540 | 720,540 | 540，405 | 450,360 | |
| Cross Dip(°) | 9° | 9° | 9° | 9° | 9° | |
| Spiral Quantity | 1~3 | 1~4 | 1~4 | 1~4 | 1~3 | |
| Max turns of Spiral | 4 | 5 | 5 | 5 | 5 | |
| Feed Size(mm) | 4-0.04 | 0.8-0.037 | 0.3-0.03 | 0.3-0.03 | 0.2-0.02 | |
| Feed Density (%) | 20-45 | 25-50 | 25-55 | 25-55 | 25-55 | |
| Capacity(t/h) | 15-40 | 6-8 | 4-6 | 2-3 | 0.8-1.2 | |
| Overall Dimension | Length(mm) | 2300 | 1560 | 1360 | 1060 | 700 |
| Width(mm) | 2300 | 1560 | 1360 | 1060 | 700 | |
| Height(mm) | 6500 | 5230、4360 | 5230、4360 | 4000、3325 | 2600、2150 | |
| Weight(kg) | 1350 | 800 | 600 | 400 | 150 | |
| Notes：1. The above technical parameters calculated based on max spiral quantity and max pitch. Specific data is subject to actual machine. 2. The feed concentration (percentage) is not absolute amount. 3. Spiral chute is different from screw pitch and the total height of corresponding spiral chute is also different. | ||||||
Excellent Mining Machinery 
Recent comments