Category Archives: Mining Equipment

Desorption and electrolysis unit

Brief introduction

Our desorption electrolysis unit is a new style high efficiency product integrated with new technique and technology that is used to process gold carrier carbon in gold production. This unit can perform outstanding desorption function for gold carrier carbon from gold mine carbon pulp plant and heap leaching plant so as to produce gold.

Featuresdesorption-and-electrolysis-unit

1. High desorption rate,
2. High production capacity and low production cost
3. Cyanide free desorption
4. Barren carbon requires no dry heat re-generation
5. Carbon is conveyed by the automatic special non-destructive method. This conveyance process produces no powder carbon, carbon loss and gold loss.
6. High degree of automation reduces the labor intensity of workers; cyanide free environment presents good working environment.

Technical data

Model Capacity of per batch (Gold carrier carbon kilogram per batch) Capacity of per day (Gold carrier carbon kilogram per batch)
 5000 5000 5000-7500
 4000 4000 4000-6000
3000 3000 3000-4500
2000 2000 2000-3000
 1500 1500 1500-2250
1000 1000 1000-1500
800 800 800-1200
500 500 500-750
300 300 300-450

SJ series double-impeller leaching tank

Brief introduction

SJ series double-impeller leaching tank is mainly used in cyanide leaching of gold producing and sewage treatment of cyanide factories. It is also used in metallurgy, chemical industry and light industry. In carbon slurry process and cyanide process, the leaching tank should be used together with carbon screen, carbon pulp and other auxiliary equipment.

FeaturesSJ-series-double-impeller-leaching-tank

1.Reasonable structure and high transmission efficiency.
2.Large diameter impeller and low rotate speed lead to the low power and carbon consumption.
3.Air spread evenly; bubble size is small.
4.Impeller is lined with rubber; cycle speed is low; long service life.
5.Stirring intensity is proper, pulp density and fineness distribution are almost the same. Increase the
6.cyanide leaching efficiency and carbon adsorption rate.

Technical data

Model Diameter×Height (mm) Effective volume (m3) Rotating speed of impeller (r/min) Diameter of impeller (mm) Feeding pipe (mm) Discharging pipe diameter (mm) Planet cycloidal reducer Weight (kg)
Model Speed ratio Power(kw)
SJ2.5×2.5 2500×2500 6 65 800 2-Φ133 2-Φ133 XLD2.2-4-29 29 2.2 2800
SJ2.5×3.15 2500×3150 13 57 935 2-Φ125 2-Φ125 XLD2.2-4-29 29 2.2 3120
SJ3×3.15 3000×3150 18.93 51 1130 2-Φ150 2-Φ150 XLD4-5-35 35 4 5300
 SJ3.15×3.55 3150×3550 24 43 1260 2-Φ150 2-Φ150 XLD4-5-35 35 4 5488
SJ3.5×3.5 3500×3500 29 46 1310 2-Φ150 2-Φ150 XLD5.5-5-29 29 5.5 7820
SJ3.55×4.0 3500×4000 35 36.3 1310 2-Φ150 2-Φ150 XLD4-5-35 35 4 6646
SJ4.0×4.5 4000×4500 50 33.5 1500 2-Φ150 2-Φ150 XLD7.5-7-43 43 7.5 8285
SJ4.5×5.0 4500×5000 71.67 33.5 17500 2-Φ159×6 2-Φ159×6 XLD7.5-7-43 43 7.5 10800
SJ5.0×5.6 5000×5600 98 31 1900 2-Φ159×8 2-Φ159×8 XLD11-8-47 47 11 13340
SJ5.5×6.0 5500×6000 112 31 2100 2-Φ159×8 2-Φ159×8 XLD11-8-47 47 11 18745
SJ7.5×8.0 7500×8000 268.6 21 2900 2-Φ159×8 2-Φ159×8 XLD22-10-47 47 22 32796
SJ8.0×8.5 8000×8500 342 16.4 3200 2-Φ159×8 2-Φ159×8 XLD22-11-59 59 22 42467

6S Shaking Table

Brief introduction

6S Shaking table is one kind of main equipment of gravity concentration, which is be widely used in minerals separation of tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ores. It is applied in different separations of rough concentration, elaborate concentration and scavenging concentration, which can process coarse sand (2-0.5mm), fine sand (0.5-0.074mm) and ore slurry(-0.074). It also can be used in processing iron, manganese ore and coal. The effective recycling granularity range of shaking table is 2-0.22 millimeters during processing tungsten, tin ores.

Features6S-shaking-table

1.Characterized by high rich ore ratio, high separating efficiency.
2.Easiness to take charge and convenient adjustment.
3.Keep table surface operate balanced even though changing cross fall and stroke.
4.The springs with compact structure are placed in the table.
5.The final concentrated ore and gangue can be obtained once.

Technical data

Model and Specification 6-S/LY 6-S/LY 6-S/LY LY
Table Size(mm) Length×Feed width×Concentrate width 4520×1850×1560 3000×1620×1100 2100×1050×850 1100×500×430
Selective are(㎡) 7.67 4.08 2 0.51
Feed size(mm) coarse sand 1-2.5 0.6-1.5 0.4-0.8 0.1-0.2
fine sand 0.8-1.2 0.3-0.8 0.2-0.5 0.05-0.1
slurry 0.3-0.6 0.2-0.4 0.1-0.2 0.03-0.05
Water consumption(t/h) 0.5~3.5 0.3~1.5 0.2~1 0.1~0.5
Stroke(mm) 8~36 10~30 12~28 9~17
Jig frequency(q/m) 240~380 240~420 250~450 280~460
Cross fall(°) 0°~5° 0°~8° 0°~10° 0°~10°
Motor Model Y70L-4 Y100L-4 Y90L-4 Y80L-4
Power(kw) 1.1 1.1 1.1 0.55
Revolving speed(r/min) 1400 1400 1400 1400
V-belt(mm) A-2000 A-1033 B-2007 A-1245
Overall Dimension(Length*Width*Height)mm 5630×1850×900 4075×1320×780 3040×1050×1020 1530×500×800
Weight(kg) 650 550 350 150
Notes: The above technical parameters based on stationary type shaking table, are for your reference only.

JT Sawtooth wave jigger

Brief introduction

Sawtooth wave jigger is environmental friendly, highly efficient and energy saving new gravity separation equipment, which is widely applicable to various minerals separation of gold, tungsten, tin, iron, manganese, titanium, chromium, sulfur, coal and diamond and the smelting slag recovery of manganese slag, chromium slag and stainless steel slag as well as metal recycling of tailings.

FeaturesJT-Sawtooth-wave jigger

1. Large handling capacity;
2. Wide range of selective recovery granularity and high recovery rate;
3. Recovery rate of valuable mineral with medium-fine particle-size increased;
4. Low water consumption and low floor space;
5. Stroke is adjustable;
6. Max handling mineral particle size reaches 60mm.

Technical data

Model JT-0.57 JT1-1 JT2-2 JT3-1 JT4-2 JT5-2/td>
Jigging Chamber Section Form Trapezium Trapezium Rectangle Trapezium Rectangle Trapezium
Length*Width(mm) 450~750×950 450~900×1500 1070×1070 960~2000×1950 1510×1510 1200~2000×3150
Column Number Single Single Single Single Single Single
Jig Chambers(psc) 1 1 2 1 2 2
Single chamber area (㎡) 0.57 1 1.14 3.3 2.43 2.12(single chamber) 2.77(double  chamber)
Total area(㎡) 0.57 1 2.28 3.3 4.86 5
Stroke Coefficient 0.57 0.64 0.45 1 0.58(single power) 0.45(dual power) 0.58(single power) 0.45(dual power)
Max feed size(mm) 6 5 10 <20 8, plus sieve automatic discharge <60 8, plus sieve automatic discharge <60
Capacity(t/h) 1~2.5 2~3 4~8 10~15 12~16 10~20
Water Consumption(m³/h) 1~2 2~3 2~4 3~6 4~8 5~10
Separator Stroke(mm) 12,17,21 12,17,21 12,17,21 10~47 adjustable 10~30 15,20,25
Jig frequency(min-1) 60~156 adjustable 60~156 adjustable 60~156 adjustable 80~100 adjustable 80~120 adjustable 80~120 adjustable
Motor Model YCT 132-4B YCT 100L-6 YCT32-4 YCT-4B YCT 160-4B YCT 200-4A
Power (kw) 1.5 2.2 3 5.5 5.5 (dual power) 7.5 (single power) 5.5 (dual power) 7.5 (single power)
Overall Dimension(Length*Width*Height)mm 1530×780×1550 2060×1112×1890 2870×1520×1880 2662×2000×3030 4240×1990×2750 3940×2006×2580
Weight(kg) 612 989 1637 3260 3500 3854
Notes: The above data is only for your reference, capacity and hutch water varying from ore granularity, ore property and operating condition.

LL Spiral chute

Brief introduction

Spiral chute is a type of new gravity separation equipment, which is applicable to separate metallic minerals granularity between 4 —0.02, such as iron , ilmenite, chromite, pyrite, tungsten ore, tin ore, tantalum-niobium ore, gravel mine, zirconite and rutile as well as other nonferrous metals, rare metals and nonmetallic minerals with adequate gravity difference.

FeaturesLL-spiral-chute

  1. Stable and clear mineral separation with large handling capacity
  2. High efficiency with higher concentration ratio and high recovery
  3. High adaptability of the feeding capacity and the variability of concentration, granularity and grade
  4. Easy for installation with small floor space and simple operation
  5. Material quality material quality with features of moisture resistance, rust protection and corrosion resistance
  6. With advantages of non-powered, without moving parts and without noise

Technical data

Model LL-2000 LL-1500 LL-1200 LL-900 LL-600
External Diameter(mm) 2000 1500 1200 900 600
Pitch(mm) 1200 720,540 720,540 540,405 450,360
Cross Dip(°)
Spiral Quantity 1~3 1~4 1~4 1~4 1~3
Max turns of Spiral 4 5 5 5 5
Feed Size(mm) 4-0.04 0.8-0.037 0.3-0.03 0.3-0.03 0.2-0.02
Feed Density (%) 20-45 25-50 25-55 25-55 25-55
Capacity(t/h) 15-40 6-8 4-6 2-3 0.8-1.2
Overall Dimension Length(mm) 2300 1560 1360 1060 700
Width(mm) 2300 1560 1360 1060 700
Height(mm) 6500 5230、4360 5230、4360 4000、3325 2600、2150
Weight(kg) 1350 800 600 400 150
Notes:1. The above technical parameters calculated based on max spiral quantity and max pitch. Specific data is subject to actual machine. 2. The feed concentration (percentage) is not absolute amount. 3. Spiral chute is different from screw pitch and the total height of corresponding spiral chute is also different.